1m
Double lip seal for sealing glass or acrylic shower doors from 5 to 8 mm thick
Preparation:
If necessary, remove the old seal, remove traces of glue or silicone, clean various residues
Measure the width of your door
Transfer it to the joint, cut the hard part using a single-blade cutter or fine saw, and the flexible part with a chisel or cutter.
Instructions for use:
6 to 8mm doors: Attach or slide the seal along the bottom of the door to the desired location
5mm doors: First apply silicone to all clear surfaces or Joint & Fix Cristal, then attach or slide the seal along the bottom of the door to where required.
Product advantages:
Easy to implement
Attaches to the shower door
Storage:
Store at temperatures from -5°C to +40°C.
At 20°C, the shelf life of the product is 10 years.
Tip:
In cold weather, to facilitate installation, we recommend that it be placed at room temperature for 1 hour before installation. place.
Dismantled doors may be easier to work with
You might also like
Earn 0.58 point/€0.06
(Each €10.00 spent = 1 point, 1 point = €0.10 discount)
You might also like
