| Name: |
TECEbase toilet module with Base cistern, including TECEbase bright chrome toilet flush plate, installation height 1120 mm
|
| Description: |
Toilet module for single block mounting, as a pre-wall module in front of solid walls, and for incorporation into metal or wooden stud walls. Base cistern for front actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled
- Cistern connection with outer thread R 1/2" at the top, compatible with quick adapters
- 3-way stop valve; shut-off valve with flush function with installed filling valve
- 10 litre tank volume; 6 litre pre-set standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; remaining volume can be used for immediate cleaning flush.
- Insulated against condensation water
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
Module frame:
- Self-supporting, powder-coated
- Two M 12 retaining bolts and nuts
- Four rivet nuts for installation spacing 180 mm or 230 mm
- Mounting set for solid walls
- Toilet drain bend DN 90 with joint adapter DN 90/100, made of PP
- Joint adapter also suitable for horizontal installation
- DN 90 toilet connection set including protective plug
- TECEbase dual-flush plate in bright chrome
- Toilet sound insulation set
Please order separately:
- TECE upgrade set dry-wall for TECE shower toilets (optional)
- Shell structure/fine installation set to connect an electronic shower toilet
Note:If toilet ceramics with a reduced supporting surface are used (= distance from middle of fixing bolt to lower edge of supporting surface is not larger than 18 cm) - e.g. V & B Memento, Sentique, Subway 2.0 - it is necessary to install the steel brace set 9041029 in the lower build space.
|